Gear Oil Additive

The MoS2 additive creates a heavy-duty lubricant film on all frictioning and sliding metal surfaces. It reduces friction, wear and decreases temperature peaks. The result is a smoother run, softer shifting and a nearly wear-free running-in in gear wheels, friction couples and tribological pairings. Reliability and antifriction properties are significantly increased.

Available pack sizes

20 g Tube plastic (Part No. 1040)
50 g Tube plastic (Part No. 2510)

Technical Data Sheet

Intended use

For manual, auxiliary and differential transmissions – particularly with high thermal loads. 2% (20g) Gear Oil Additive is sufficient for 1 liter of gear oil. Not suitable for motorbikes with a wet clutch.

Properties

  • resistant to stresses and vibrations
  • increases operational reliability
  • assures optimum shifting performance
  • friction and wear reducing
  • outstanding emergency-running properties
  • reduces transmission noise
  • secures optimum transmission operation

Areas of application

Added to motor vehicle manual transmissions, axle drives, differential transmissions and mechanical steering systems. Not suitable for fully automatic transmissions and couplings that run in an oil bath.

Application

Gear Oil Additive is added to the gear oil – mixing takes place automatically during operation. The product is suitable for both mineral and synthetic gear oils. 2% (20g) Gear Oil Additive is sufficient for 1 liter of gear oil.

Not suitable for use with wet clutches!