Motor Protect

Full synthetic motor oil additive. It significantly reduces wear. High-pressure wear protection additives create a very thin layer on the engine friction points that is moldable and low-friction under wear conditions. Its effectiveness lasts for at least 50,000 km. That produces these benefits: • Significant wear reduction • Extended engine service life • Fuel and emissions reduction through smooth-run effect • Optimal engine power, quiet running.

Available pack sizes

300 ml Can sheet metal (Part No. 2906)

Technical Data Sheet

Description

Motor Protect is a synthetic and oil-soluble engine-oil additive which has been developed according to the latest technology for use in modern petrol and diesel engines. The surface active components of this high pressure/anti-wear additive in combination with new friction modifiers reduce mechanical wear and friction by modifying the surfaces.

Intended use

The additive is added to the new oil AFTER an oil change. 500 ml sufficient for up to 5 l motor oil. Adding to low-friction full-synthetic low-viscosity oils reduces wear further by approx. 35%. With long-term effectiveness for 50,000 km (comply with oil change intervals from vehicle manufacturer).

Properties

  • reduces oil and fuel consumption
  • highest thermal stability
  • friction and wear reducing
  • has a lasting effect
  • tested for turbochargers and catalytic converters
  • highly economical
  • increases smooth operation

Areas of application

For petrol and diesel engines. Not suitable for use on motorbikes with wet clutches.

Application

Motor Protect should be added approximately every 50,000 km during oil changes. One 500 ml can is sufficient for up to 5 litres oil. Reduce the specified oil volume by 500 ml. For the sake of economy, the product should be added during or shortly after oil changes. Motor Protect is compatible with all commercially available mineral-based and synthetic based engine oils.

Not suitable for use with wet clutches!