Motorbike 4T Synth 10W-50 Street Race

Fully synthetic high-performance motor oil. Ensures maximum performance and protection of the engine under all operating conditions. Optimum lubrication, outstanding engine cleanliness, excellent friction and minimum wear are just as much taken for granted as gentle clutch engagement and disengagement and gear shifting. That makes a big difference to driving enjoyment! Tested on engines with catalytic converters. Tested on racing machines.

Available pack sizes

1L Canister plastic (Part No. 1502)

Technical Data Sheet

Description

Fully synthetic high-performance motor oil. Ensures maximum performance and protection of the engine under all operating conditions. Optimum lubrication, outstanding engine cleanliness, excellent friction and minimum wear are just as much taken for granted as gentle clutch engagement and disengagement and gear shifting. That makes a big difference to driving enjoyment! Tested on engines with catalytic converters. Tested on racing machines.

Intended use

Developed for air and water-cooled 4-stroke engines exposed to normal to extreme operating conditions. For sporting applications. Suitable for engines with or without a wet clutch.

Properties

  •  high shear stability
  • optimum stability to aging
  • optimum lubrication under all operating conditions
  • tested for catalytic converters
  • especially suitable for wet clutches
  • guarantees low oil consumption
  • excellent wear protection

Specifications and approvals:
API SL ∙ JASO MA2

Technical data

  • SAE class (engine oils) 10W-50 SAE J300
  • Density at 15 °C 0,850 g/cm³ DIN 51757
  • Viscosity at 40 °C 123 mm²/s ASTM D 7042-04
  • Viscosity at 100 °C 18,5 mm²/s ASTM D 7042-04
  • Viscosity at -30°C (MRV) < 60000 mPas ASTM D 4684
  • Viscosity index 169 DIN ISO 2909
  • Viscosity at -25°C (CCS) <= 7000 mPas ASTM D 5293
  • Pour point -39 °C DIN ISO 3016
  • Evaporation loss (Noack) 5,0 % CEC-L-40-A-93
  • Flash point 254 °C DIN ISO 2592
  • Total base number 6,3 mg KOH/g DIN ISO 3771
  • Sulfate ash 0,8 g/100g DIN 51575
  • Color number (ASTM) L 2,0 DIN 51578

Areas of application

Developed for air and water-cooled 4-stroke engines exposed to normal to extreme operating conditions. For sporting applications. Suitable for engines with or without a wet clutch.

Application

The operating instructions of the engine manufacturers must be followed. Note: Optimum effectiveness only when the product is used on its own (i.e. no mixing).